36g initial force 50g bottom out force 3.5mm total travel 120Gs initial magnetic flux 700Gs bottom out magnetic flux 20mm spring Dual rail stem guide High temperature resistant magnets This switch uses magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance traveled. It requires special PCBs and is not compatible with regular mechanical keyboards. Due to manufacturing differences, this switch may not be compatible with all magnetic or Hall Effect keyboards.
Notas de Pesquisa
1. What this is
Gateron Magnetic Jade Air Linear Switch is a magnetic (Hall-effect) keyboard switch from Gateron. It is linear, magnetic/Hall-effect.
2. Spec decode (from product name)
- Switch type: linear
- Magnetic (Hall-effect): yes — analog/adjustable actuation (requires a compatible HE keyboard)
3. Compatibility & use
Standard MX-style keyboard switch — note: magnetic/Hall-effect switches only work in Hall-effect keyboards, not standard mechanical PCBs. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Gateron product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Fonte
- Gateron Gateron Magnetic Jade Air Linear Switch — keyboard-switch spec
Especificações
|
Device class
|
magnetic (Hall-effect) keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Magnetic
|
true
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Keyboard Switches
|
|
Series description
|
Gateron mechanical keyboard switch (linear)
|
|
Shopify id
|
10004459585836
|
|
Switch type
|
linear
|
|
Vendor
|
Gateron
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Onde comprar
Faixa de preço
$0.62 — $0.62
from 1 seller in US dollars
Especificações rápidas
- Device class
- magnetic (Hall-effect) keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Magnetic
- true
- Pn status
- decoded-partial
- Product type
- Keyboard Switches
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor