CannonKeys is pleased to offer new Lilac Tactile Switches! These Durock switches feel similar to T1s, but are a bit smoother. Like the color and materials but want to customize the feel and sound? Check out our slow springs and Accessories for all your switch modding essentials. Available in quantities of 36. Switch Type Tactile Manufacturer Durock Top Housing Material Nylon/PC-blend Bottom Housing Material Nylon Stem Material POM Spring Weight 65g Mounting Pins 5-pin Factory Lube Light
Notatki Badawcze
1. What this is
LILAC TACTILE ("Lilac Tactile Switch") is catalogued as a push-button / switch device.
2. What we know
- Manufacturer: not recorded (placeholder: "Stocked")
- Category: push-button / switch device
- Part number / name: LILAC TACTILE — Lilac Tactile Switch
- (no real manufacturer recorded — 'Stocked' is a source-catalog placeholder; identify the part from its name/number)
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the part number/name on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- Distributor / marketplace listing — search "LILAC TACTILE" / "Lilac Tactile Switch"
Źródło
- Stocked LILAC TACTILE — distributor/catalog
Specyfikacje
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Accessories
|
|
Shopify id
|
4378792427631
|
|
Vendor
|
Stocked
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Gdzie Kupić
Przedział cenowy
$15.95 — $15.95
from 1 seller in US dollars
Skrócone Specyfikacje
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Accessories
- Shopify id
- 4378792427631
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru