STI-6518

Aktywny
UL LISTED (US & CANADA)

STI-6518 Bopper Stopper — Clear Protective Push-Button Cover (spring hinge)

STI (Safety Technology International) Stopper II Seria Introduced circa 1990

STI Bopper Stopper — clear polycarbonate spring-hinged protective cover for push buttons/keypads/outlets. Passive cover, no horn.

Typowe Zastosowania

The red protective cover over emergency buttons and fire alarm pull stations in every school, hospital, and commercial building. Lift the cover to access the button underneath — the built-in horn sounds when the cover is raised, deterring false alarms. Polycarbonate is virtually unbreakable. The most recognizable safety product in commercial buildings.

Notatki Badawcze

1. Overview

The STI-6518 is Safety Technology International's "Bopper Stopper®," a clear polycarbonate protective cover with a spring-loaded hinge that flips up for access and snaps closed to shield the device beneath. It mounts over existing push buttons, keypads, electrical outlets, thermostats, and volume/lighting controls to prevent accidental activation, tampering, and vandalism. It is a passive cover — it adds no switch or electronics of its own.

2. User Sentiment

Widely stocked by industrial/commercial suppliers (Grainger, Zoro, Galco, WebstaurantStore) and on Amazon in singles and 2-packs. Buyers value the simple drop-over installation and the sturdy transparent shell that keeps the protected control visible; the spring hinge is the most-praised feature for quick legitimate access. A recurring note is that the cover is fairly bulky (~5" tall) relative to a single small button.

3. Real-World Applications

Protecting request-to-exit buttons, door-release and call buttons, keypads, and outlets in schools, hospitals, retail, and commercial buildings where accidental presses or abuse are a concern. Common in access-control installs to guard the exit button against unintended activation.

4. Technical Specifications

  • Type: Protective cover (spring-loaded hinged), passive — no integral switch
  • Material: Polycarbonate cover + hinge; stainless-steel hinge springs
  • Color: Clear (transparent)
  • Dimensions: ~5" H × 3-3/16" W × 1-3/4" D; includes mounting plate
  • Operating temp: -40° to 250°F (-40° to 121°C); flammability rating 94V-2
  • Mounting: Surface mount over the existing device
  • Certification: UL Listed (US & Canada)

5. Ordering & Compatibility

Sold individually and in 2-packs (Amazon, Zoro, Grainger PN 48ZR18, Galco, WebstaurantStore 472STI6518). Fits standard push buttons and single-gang devices. STI's broader Stopper® family includes covers for other sizes and sounder-equipped models — but the -6518 itself has NO horn/sounder. Backed by STI's 3-year guarantee against breakage in normal use.

6. Known Issues

No significant reliability issues reported. It is a passive polycarbonate shell, so the main limitation is bulk on small controls; there are no electrical failure modes (it carries no circuitry).


Źródło
  1. Single-Gang and Bopper Stopper Protective Cover STI-6518 — sti-global.com
  2. Safety Technology Intl STI-6518 Protective Cover (48ZR18) — grainger.com
  3. STI Bopper Stopper, Clear, 3-1/4inW x 1-3/4inD STI-6518 — zoro.com
  4. STI-6518 Bopper Stopper with Spring Loaded Hinge - Clear Protective Cover — amazon.com
  5. STI Bopper Stopper Clear Indoor/Outdoor Protective Cover STI-6518 — webstaurantstore.com
  6. STI-6518 Safety Technology International Protective Covers — galco.com

Specyfikacje

Certifications
UL Listed (US & Canada)
Color
Clear
Dimensions
~5in H x 3-3/16in W x 1-3/4in D (mounting plate included)
Material
Polycarbonate cover/hinge; stainless-steel hinge springs
Mounting Type
Surface mount over existing device
Operating temp
-40F to 250F (-40C to 121C); flammability 94V-2
Type
Protective cover (spring-hinged, passive)

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Gdzie Kupić

Przedział cenowy

$55.28 — $98.38

across 2 sellers in US dollars

Skrócone Specyfikacje

Certifications
UL Listed (US & Canada)
Color
Clear
Dimensions
~5in H x 3-3/16in W x 1-3/4in D (mounting plate included)
Material
Polycarbonate cover/hinge; stainless-steel hinge springs
Mounting Type
Surface mount over existing device

Co Mówią Użytkownicy

+

“The red protective cover over emergency buttons and fire alarm pull stations in every school, hospital, and commercial building. Lift the cover to access the button underneath — the built-in horn soun”

Reddit r/security 25 głosy za Zobacz wątek →