QanBa 30mm Snap In Translucent Arcade Button. This button is very similar to the Sanwa OBSC-30 and is used in QanBa's Arcade Sticks and Fighsticks.
Specyfikacje
|
Arcade express id
|
757
|
|
Weight kg
|
0.010000
|
Skrócona Instrukcja Montażu
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Wymiary
Rozwiązywanie Problemów
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Skrócone Specyfikacje
- Arcade express id
- 757
- Weight kg
- 0.010000
