Tactile Switches Tactile pushbutton switch, smt J-hook terminals, Ag plated contacts, plastic button
Research Notes
1. What this is
SMT3-01E-Z ("Nidec Components SMT3-01E-Z") is catalogued as a push-button / switch device from Nidec Components.
2. What we know
- Manufacturer: Nidec Components
- Category: push-button / switch device
- Part number / name: SMT3-01E-Z — Nidec Components SMT3-01E-Z
- Nidec Components (Copal/Nidec) — switches, encoders, and potentiometers
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Nidec Components catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.
5. Sources
- Nidec Components product catalog — search "SMT3-01E-Z" / "Nidec Components SMT3-01E-Z"
1 source
- Nidec Components SMT3-01E-Z — distributor/catalog
Specyfikacje
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Lead time
|
84 Days
|
|
Mouser part number
|
229-SMT3-01E-Z
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
RoHS Compliant
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Skrócone Specyfikacje
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Lead time
- 84 Days
- Mouser part number
- 229-SMT3-01E-Z
- Pn status
- needs-verification
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru
