BOX GLAZED GREEN 45G CLICKY PLATE MOUNT

Name: Kailh BOX GLAZED GREEN 45G CLICKY PLATE MOUNT
Brand: Kailh
SKU: BOX GLAZED GREEN 45G CLICKY PLATE MOUNT
Price: 0.5 USD
Availability: InStock

Aktywny

Kailh Box Glazed Green 45g Clicky Plate Mount Switch

45g actuation force 1.8mm pre-travel 3.6mm total travel Polycarbonate top housing Nylon bottom housing POM BOX-style stem Compatible with SMD LEDs Only IP56 Waterproof and Dustproof

Notatki Badawcze

1. What this is

Kailh Box Glazed Green 45g Clicky Plate Mount Switch is a mechanical keyboard switch from Kailh. It is clicky, 45g, 3-pin (plate mount).

2. Spec decode (from product name)

Switch type: clicky
Actuation force: 45g
Mount: 3-pin (plate mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); this is a 3-pin plate-mount switch (needs a plate). Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Kailh product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Źródło

Kailh Kailh Box Glazed Green 45g Clicky Plate Mount Switch — keyboard-switch spec

Specyfikacje

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	45g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	3-pin (plate mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Kailh mechanical keyboard switch (clicky)
Shopify id	8874568679724
Switch type	clicky
Vendor	Kailh

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.