MINI I TACTILE

Aktywny

Gateron Mini i Tactile Switch

Gateron MINI I TACTILE — Gateron Mini i Tactile Switch

CannonKeys is proud to offer Gateron Mini i Tactile Switch! The  Gateron Mini i Tactile Switch  is a new tactile addition from Gateron  lineup! Designed with office use in mind,  the Mini i features a tactile bump and 22mm double staged spring. Switch Type Tactile Manufacturer Gateron Top Housing Material Nylon Bottom Housing Material Nylon Stem Material POM Spring Weight 22mm dual-stage, 50±10gf operating force Mounting Pins 5-pin Factory Lube Yes

Notatki Badawcze

1. What this is

Gateron Mini i Tactile Switch is a mechanical keyboard switch from Gateron. It is tactile.

2. Spec decode (from product name)

  • Switch type: tactile

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • Gateron product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Źródło
  1. Gateron Gateron Mini i Tactile Switch — keyboard-switch spec

Specyfikacje

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Accessories
Series description
Gateron mechanical keyboard switch (tactile)
Shopify id
7147784274031
Switch type
tactile
Vendor
Stocked

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Zdjęcia i Rysunki

Zdjęcia: cdn.shopify.com

Gdzie Kupić

Przedział cenowy

$22.95 — $22.95

from 1 seller in US dollars

Skrócone Specyfikacje

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Accessories
Series description
Gateron mechanical keyboard switch (tactile)