KS-27-RED
AktywnyGateron KS-27 Low Profile Red Linear
Gateron KS-27 low-profile switch — Gaterons entry into slim keyboards.
Typowe Zastosowania
Gaterons answer to Kailh Choc. Proprietary low-profile mount (not Choc compatible). Used in Nuphy Halo, Keychron K5 Pro, and other slim mechanical keyboards. 3.5mm total travel. Factory lubed.
Specyfikacje
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
45g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red stem
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
70,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Gateron LP PCB mount
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
1.5mm actuation, 3.5mm total
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Gdzie Kupić
Przedział cenowy
$140.0 — $162.28
u 2 dystrybutorów
Skrócone Specyfikacje
- Actuation Force
- 45g
- Color
- Red stem
- Mechanical Life
- 70,000,000 cycles
- Mounting Type
- Gateron LP PCB mount
- Travel Distance
- 1.5mm actuation, 3.5mm total
Co Mówią Użytkownicy
“Gaterons answer to Kailh Choc. Proprietary low-profile mount (not Choc compatible). Used in Nuphy Halo, Keychron K5 Pro, and other slim mechanical keyboards. 3.5mm total travel. Factory lubed.”
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru
