G PRO 3.0 BLUE 60G CLICKY PCB MOUNT

Name: Gateron G PRO 3.0 BLUE 60G CLICKY PCB MOUNT
Brand: Gateron
SKU: G PRO 3.0 BLUE 60G CLICKY PCB MOUNT
Price: 0.3 USD
Availability: InStock

Aktywny

Gateron G Pro 3.0 Blue 60g Clicky PCB Mount Switch

60g actuation force Translucent polycarbonate upper housing White nylon bottom housing POM stem Frosted light guide to enhance light consistency and brightness 3-layer pin for a more reliable connection, less deformation of pins, and longer lifetime Check out the rest of the GATERON G Pro 3.0 Switch family

Notatki Badawcze

1. What this is

Gateron G Pro 3.0 Blue 60g Clicky PCB Mount Switch is a mechanical keyboard switch from Gateron. It is clicky, 60g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: clicky
Actuation force: 60g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Gateron product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

Źródło

Gateron Gateron G Pro 3.0 Blue 60g Clicky PCB Mount Switch — keyboard-switch spec

Specyfikacje

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	60g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Gateron mechanical keyboard switch (clicky)
Shopify id	9125184340268
Switch type	clicky
Vendor	Gateron

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.