Emergency Stop Switches / E-Stop Switches Emgy STOP 45MM TWIST RELEASE 2NC .2MM12A
Research Notes
1. What this is
C22-PVT45P-K02-P10 is an Eaton C22 economy 22mm command switch (compact integrated pushbutton/indicator range).
2. Part-number decode
- Series: C22
- Panel cutout: 22mm
3. Compatibility & ordering
Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.
4. Data-quality note
The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).
5. Sources
- Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
- Distributor listing (Newark / Mouser) — search the exact part number
1 source
- Eaton — C22-PVT45P-K02-P10 — eaton.com
Specyfikacje
|
Device class
|
pushbutton
|
|
Enriched by
|
eaton-decoder-2026-08-12
|
|
Lead time
|
63 Days
|
|
Manufacturer series
|
C22
|
|
Mouser part number
|
504-C22PVT45PK02P10
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
|
|
Series description
|
Eaton C22 economy 22mm command switch (compact integrated pushbutton/indicator range)
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Wymiary
Rozwiązywanie Problemów
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Gdzie Kupić
Przedział cenowy
$277.63 — $277.63
u 1 dystrybutorów
Skrócone Specyfikacje
- Device class
- pushbutton
- Enriched by
- eaton-decoder-2026-08-12
- Lead time
- 63 Days
- Manufacturer series
- C22
- Mouser part number
- 504-C22PVT45PK02P10
