10250H1884

Aktywny

Eaton 10250H1884 Push Button Control Station

Eaton 10250H1884 Push Button Control Station The Eaton 10250H1884 is a push button control station with a contact configuration of 1NO, 2NC. It has a surface mounting type.

Notatki Badawcze

1. What this is

10250H1884 is an Eaton Cutler-Hammer 10250H 30.5mm heavy-duty control component (10250-series contact block / accessory).

2. Part-number decode

  • Series: 10250H (Cutler-Hammer)
  • Panel cutout: 30.5mm
  • Type: contact/accessory

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series/family is identified; the exact configuration (color, contact, function) is left to the Eaton datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Źródło
  1. Eaton — 10250H1884 — eaton.com

Specyfikacje

Component type
contact/accessory
Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10250H (Cutler-Hammer)
Panel cutout
30.5mm
Pn status
decoded-partial
Product type
Push Button Control Station
Series description
Eaton Cutler-Hammer 10250H 30.5mm heavy-duty control component (10250-series contact block / accessory)
Shopify id
8344979800377
Vendor
Eaton

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Gdzie Kupić

Przedział cenowy

$732.24 — $732.24

from 1 seller in US dollars

Skrócone Specyfikacje

Component type
contact/accessory
Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10250H (Cutler-Hammer)
Panel cutout
30.5mm
Pn status
decoded-partial