Allen-Bradley 800R2TA Push Button Station The Allen-Bradley 800R2TA is a push button station with a contact configuration of 1NO, 1NC. It has a nema rating of 4, 13. The 800R2TA has a surface mounting type.
Notatki Badawcze
1. What this is
800R2TA is a Allen-Bradley 800R 30.5mm command switch.
2. Part-number decode
- Series: Allen-Bradley 800R
- Type: command switch
- Panel cutout: 30.5mm
3. Compatibility & ordering
Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Allen-Bradley product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Allen-Bradley product catalog (rockwellautomation.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
Źródło
- Allen-Bradley — 800R2TA — rockwellautomation.com
Specyfikacje
|
Device class
|
command switch
|
|
Enriched by
|
ab-decoder-2026-08-12
|
|
Manufacturer series
|
800R
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Push Button Station
|
|
Series description
|
Allen-Bradley 800R 30.5mm command switch
|
|
Shopify id
|
8345348669753
|
|
Vendor
|
Allen-Bradley
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Wymiary
Rozwiązywanie Problemów
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Gdzie Kupić
Przedział cenowy
$545.98 — $545.98
from 1 seller in US dollars
Skrócone Specyfikacje
- Device class
- command switch
- Enriched by
- ab-decoder-2026-08-12
- Manufacturer series
- 800R
- Panel cutout
- 30.5mm
- Pn status
- decoded-partial
Dowiedz się Więcej
Objaśnienie Klasyfikacji IP
Co oznaczają IP65, IP66, IP67, IP69K dla Państwa zastosowania
Przewodnik 22mm vs 30mm
Jakiego rozmiaru otworu montażowego potrzebujesz?
Bloki Styków: NO vs NC
Jak wybrać i podłączyć bloki styków
Narzędzie Wyszukiwania Przycisków
Znajdź właściwy przycisk wg typu, rozmiaru i koloru