Adafruit Accessories Massive Arcade LED Green Button
Specyfikacje
|
Lead time
|
5 Days
|
|
Mouser part number
|
485-1188
|
|
Rohs status
|
RoHS Compliant
|
Skrócona Instrukcja Montażu
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Wymiary
Rozwiązywanie Problemów
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Skrócone Specyfikacje
- Lead time
- 5 Days
- Mouser part number
- 485-1188
- Rohs status
- RoHS Compliant
