WUQUE WS AROWANA YELLOW LINEAR

Name: Wuque Studio WUQUE WS AROWANA YELLOW LINEAR
Brand: Wuque Studio
SKU: WUQUE WS AROWANA YELLOW LINEAR
Price: 7.95 USD
Availability: InStock

현행 제품

Wuque WS Arowana Yellow Linear Switches

Wuque WS Arowana Yellow Switches are linear switches manufactured by HMX. Out of the Arowana switches, the Yellows are the lightest and most high-pitched of the four with a bright and crisp sound profile. Wuque WS Arowana Yellow Switches Feature: 18 included in each pack Linear Manufactured by HMX Top Housing: PC Bottom Housing: PC Stem: POM Pre-Travel: 2.0±0.5mm Total Travel: 3.6±0.3mm Actuation: 32±5g Bottom-out: 37±5g MX Structure 5-Pin, PCB Mount Lubed Price: $0.39 per switch Includes: 18 Wuque WS Arowana Yellow Switches

연구 노트

1. What this is

Wuque Studio Wuque WS Arowana Yellow Linear Switches is a mechanical keyboard switch from Wuque Studio. It is linear.

2. Spec decode (from product name)

Switch type: linear

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Wuque Studio product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

출처

Wuque Studio Wuque WS Arowana Yellow Linear Switches — keyboard-switch spec

사양 목록

Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Pn status	decoded-partial
Product type	Switches
Series description	Wuque Studio mechanical keyboard switch (linear)
Shopify id	7480823251009
Switch type	linear
Vendor	Wuque Studio

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.