E-1600-52A
현행 제품ADA Emergency Call Button Blue Light Phone
Viking E-1600 emergency call button for blue light phone towers.
일반적인 용도
The emergency call button on blue light towers found on every college campus, parking garage, and public transit station. One press connects to campus security or 911 dispatch. Large stainless steel button with EMERGENCY label visible from distance. ADA compliant. Built to withstand weather, vandalism, and years of outdoor exposure.
사양 목록
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
Yes
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, ADA Section 508
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Stainless Steel
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Surface mount
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
VoIP / SIP / Analog phone line
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
주요 사양
- ADA Compliant
- Yes
- Certifications
- UL, ADA Section 508
- IP Rating
- IP66
- Material
- Stainless Steel
- Mounting Type
- Surface mount
사용자 후기
“The emergency call button on blue light towers found on every college campus, parking garage, and public transit station. One press connects to campus security or 911 dispatch. Large stainless steel b”