PBES22N21R

현행 제품

TE Connectivity / Alcoswitch PBES22N21R

TE Connectivity / Alcoswitch PBES22N21R — TE Connectivity / Alcoswitch PBES22N21R

시리즈 사진: 판매자가 이를 9개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Emergency Stop Switches / E-Stop Switches PBES22 40 RB NO LAMP NO NO NC

연구 노트

1. What this is

PBES22N21R is a TE/Alcoswitch PBES sealed pushbutton.

2. Part-number decode

  • Series: TE/Alcoswitch PBES
  • Type: pushbutton

3. Compatibility & ordering

TE Connectivity / Alcoswitch makes pushbutton, toggle, slide, and tactile switches for electronics and industrial equipment. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The TE/Alcoswitch series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • TE/Alcoswitch product catalog (te.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. TE/Alcoswitch — PBES22N21R — te.com

사양 목록

Device class
pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Lead time
150 Days
Manufacturer series
PBES
Mouser part number
655-PBES22N21R
Pn status
decoded
Rohs status
RoHS Compliant
Series description
TE/Alcoswitch PBES-series sealed pushbutton switch (panel-mount, sealed)

설치 빠른 참조

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

외형 치수

문제 해결

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Lead time
150 Days
Manufacturer series
PBES
Mouser part number
655-PBES22N21R