IPE22EXRD

현행 제품

TE Connectivity / Alcoswitch IPE22EXRD

TE Connectivity / Alcoswitch IPE22EXRD — TE Connectivity / Alcoswitch IPE22EXRD

시리즈 사진: 판매자가 이를 2개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Pushbutton Switches PUSH BUTTON EXTENDED RED

연구 노트

1. What this is

IPE22EXRD is a TE/Alcoswitch IPE illuminated pushbutton.

2. Part-number decode

  • Series: TE/Alcoswitch IPE
  • Type: illuminated pushbutton
  • Illuminated: yes

3. Compatibility & ordering

TE Connectivity / Alcoswitch makes pushbutton, toggle, slide, and tactile switches for electronics and industrial equipment. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The TE/Alcoswitch series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • TE/Alcoswitch product catalog (te.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. TE/Alcoswitch — IPE22EXRD — te.com

사양 목록

Device class
illuminated pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Illuminated
true
Lead time
61 Days
Manufacturer series
IPE
Mouser part number
655-IPE22EXRD
Pn status
decoded
Rohs status
Series description
TE/Alcoswitch IPE-series illuminated pushbutton switch

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
illuminated pushbutton
Enriched by
te-alcoswitch-decoder-2026-08-12
Illuminated
true
Lead time
61 Days
Manufacturer series
IPE