FSM16JAH

현행 제품

TE Connectivity / Alcoswitch FSM16JAH

TE Connectivity / Alcoswitch FSM16JAH — TE Connectivity / Alcoswitch FSM16JAH

시리즈 사진: 판매자가 이를 17개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches 6MM HIGH TEMP TACTILE SWITCH

연구 노트

1. What this is

FSM16JAH is a TE/Alcoswitch FSM tactile switch.

2. Part-number decode

  • Series: TE/Alcoswitch FSM
  • Type: tactile switch

3. Compatibility & ordering

TE Connectivity / Alcoswitch makes pushbutton, toggle, slide, and tactile switches for electronics and industrial equipment. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The TE/Alcoswitch product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • TE/Alcoswitch product catalog (te.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. TE/Alcoswitch — FSM16JAH — te.com

사양 목록

Device class
tactile switch
Enriched by
te-alcoswitch-decoder-2026-08-12
Lead time
108 Days
Manufacturer series
FSM
Mouser part number
506-FSM16JAH
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
TE/Alcoswitch FSM-series tactile / detect switch (PCB)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
tactile switch
Enriched by
te-alcoswitch-decoder-2026-08-12
Lead time
108 Days
Manufacturer series
FSM
Mouser part number
506-FSM16JAH