3SB3602-0AA31

현행 제품

Siemens 3SB3602-0AA31 Push Button

Siemens 3SB3602-0AA31 — Siemens 3SB3602-0AA31 Push Button

Siemens 3SB3602-0AA31 Push Button The Siemens 3SB3602-0AA31 is a push button features with a momentary action. It has a flush actuator type. The 3SB3602-0AA31 has a screw clamp terminal connection.

연구 노트

1. What this is

3SB3602-0AA31 is a Siemens 3SB3 22mm modular command switch (older SIRIUS generation; operator + holder + contact block combination).

2. Part-number decode

  • Series: 3SB3 (SIRIUS)
  • Panel cutout: 22mm
  • Construction: modular (operator + holder + contact/lamp modules are separate parts)

3. Compatibility & ordering

Siemens 22mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

출처
  1. Siemens Industry Mall — 3SB3602-0AA31 — siemens.com

사양 목록

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Manufacturer series
3SB3 (SIRIUS)
Modular
true
Panel cutout
22mm
Pn status
decoded-partial
Product type
Push Button
Series description
Siemens 3SB3 22mm modular command switch (older SIRIUS generation; operator + holder + contact block combination)
Shopify id
8345158451513
Vendor
Siemens

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: cdn.shopify.com

구매처

가격 범위

$25.67 — $25.67

from 1 seller in US dollars

주요 사양

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Manufacturer series
3SB3 (SIRIUS)
Modular
true
Panel cutout
22mm