SNSW-001X16EU
현행 제품Shelly 1PM Gen3 WiFi Relay Behind Switch
Shelly 1PM Gen3 — WiFi relay that installs behind any existing wall switch.
일반적인 용도
Turns any dumb wall switch into a smart switch. Installs behind the existing switch in the junction box. Local HTTP API + MQTT — no cloud needed. Power monitoring (PM = Power Metering). ESP32-based — flashable to ESPHome or Tasmota. The most flexible smart switch solution: keeps your existing switches, adds smart control.
개방성 및 커스터마이징
커스텀 펌웨어: Stock (local HTTP/MQTT/CoAP), Tasmota, ESPHome
The gold standard for hackable behind-switch relays. Local API works without internet. OTA flashable to Tasmota/ESPHome. Auto-discovered by Home Assistant. Power consumption monitoring included.
사양 목록
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, UL
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Home Assistant, MQTT, Alexa, Google Home, Shelly Cloud (optional)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Behind wall switch (DIN rail option available)
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
WiFi 2.4GHz + Bluetooth
|
설치 빠른 참조
Setup: Pair with your hub or phone via WiFi 2.4GHz + Bluetooth. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 1-2 years. Low battery notification via the app.
외형 치수
문제 해결
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
주요 사양
- Certifications
- CE, UL
- Smart Home Integrations
- Home Assistant, MQTT, Alexa, Google Home, Shelly Cloud (optional)
- Mounting Type
- Behind wall switch (DIN rail option available)
- Protocol
- WiFi 2.4GHz + Bluetooth
사용자 후기
“Turns any dumb wall switch into a smart switch. Installs behind the existing switch in the junction box. Local HTTP API + MQTT — no cloud needed. Power monitoring (PM = Power Metering). ESP32-based — ”