MSM 19
현행 제품19mm Anti-Vandal Stainless Steel Button
Schurter MSM 19mm vandal-resistant push button with ring LED in 316L stainless steel.
일반적인 용도
Found on ATMs, self-service kiosks, ticket vending machines, and parking meters. The 316L surgical-grade stainless steel resists corrosion, scratching, and deliberate damage. IK09 impact rating withstands hammer blows. The low-profile design prevents tools from getting under the bezel.
사양 목록
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, UL
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
19mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
LED Type
The style of built-in LED illumination. Ring = glows around the edge. Dot = center point. Power symbol = illuminated power icon.
|
Ring LED
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
316L Stainless Steel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000 cycles
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK09
|
이 아이콘이 있는 사양은 제조사의 원본 출처 페이지에 연결되어 있습니다
설치 빠른 참조
Panel cutout: 19mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
구매처
가격 범위
$10.15 — $42.06
3개 대리점
주요 사양
- Actuator Function
- Momentary
- Certifications
- CE, UL
- Cutout Diameter
- 19mm
- IP Rating
- IP67
- LED Type
- Ring LED
사용자 후기
“Schurter MSM series is the gold standard. 316L stainless, IK09 rated, IP67. Not cheap but we havent had a single failure in 3 years across 200 kiosks. The ring LED looks premium too.”
자세히 보기
데이터 출처
사양 및 제품 데이터는 다음 참고 자료에서 수집되었습니다.
MSM19 Product Page
https://www.schurter.com/en/Products/Switches/Metal-Line/MSM-19
접속일 April 04, 2026
