Schneider Electric · Harmony XB4 시리즈

XB4BA61

현행 제품
UL CSA CE

22mm Blue Complete Push Button 1NO

부품 번호: B - A - 6
Schneider Electric Harmony XB4 시리즈 Introduced circa 2003
Schneider Electric XB4BA61 — 22mm Blue Complete Push Button 1NO

Schneider XB4BA61 — complete blue push button.

일반적인 용도

Complete blue reset button. One part number. Blue = mandatory action/reset per IEC 60204-1.

사양 목록

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
IP Rating
IP66
Material
Metal

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

배선도

L T 11 12 NO (open) press ↓

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

주요 사양

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm

사용자 후기

+

“Complete blue reset button. One part number. Blue = mandatory action/reset per IEC 60204-1.”

Reddit r/PLC 16 추천 스레드 보기 →