ZB5AV6

현행 제품

Schneider Electric ZB5AV6 Light Block with Body Fixing Collar

부품 번호: ZB5 - A - V

Schneider Electric ZB5AV6 Light Block with Body Fixing Collar The Schneider Electric ZB5AV6 is a light block with body fixing collar has a voltage rating of 250VAC. It has a screw clamp terminal connection. The ZB5AV6 is used for XB4/5 illuminated operators and pilot lights.

연구 노트

1. What this is

ZB5AV6 is a Schneider Electric Harmony ZB5 22mm PLASTIC-bezel modular component (operator head OR contact block, for user assembly into an XB5 device).

2. Part-number decode

  • Series: Harmony ZB5
  • Panel cutout: 22mm
  • Bezel material: Plastic
  • Type: head/block (modular)

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a modular component — a Harmony/9001 device is assembled from an operator head + mounting collar + contact/light block(s). Confirm you have the matching head and blocks for a complete device. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

출처
  1. Schneider Electric — ZB5AV6 — se.com
Harmony XB5 제품군 소개

제품 라인 전체에 적용되며, ZB5AV6에만 국한되지 않습니다.

제품 라인 소개

Harmony XB5는 Schneider Electric의 플라스틱 22mm 푸시버튼, 셀렉터 스위치, 키 스위치, 비상 정지 버튼 및 파일럿 라이트 제품군입니다. 이 제품은 이중 절연(Class II)으로 제작되었으며, 다크 그레이 베젤 또는 많은 부품에서 라이트 그레이 베젤을 선택할 수 있습니다. 이는 금속 제품인 Harmony XB4의 플라스틱 버전으로, 동일한 기능, 동일한 22mm 구멍 크기, 그리고 대부분의 부품을 공유합니다. 30mm 구멍용 플러시 버전은 XB5F / ZB5F로 판매됩니다.

부품 번호 체계

  • 완전한 유닛 = 본체 + 헤드. XB5AD33은 2개의 NO 접점(ZB5AZ103)이 있는 본체와 헤드(ZB5AD3)로 구성됩니다. 또한 고정 칼라 ZB5AZ009, 접점 블록 및 헤드를 별도로 구매할 수 있습니다.
  • 그레이 베젤: C0을 추가합니다(XB5AD33 → XB5AD33C0).
  • 푸시인 단자: 5로 끝나는 완전한 유닛(XB5AD335).
  • 셀렉터 헤드는 XB4와 동일하게 작동합니다: ZB5AD2 두 위치 유지; ZB5AD4 오른쪽에서 왼쪽으로 스프링 리턴; ZB5AD3 세 위치 유지; ZB5AD5 중앙으로 스프링 리턴; ZB5AD7 / ZB5AD8 왼쪽 / 오른쪽에서 중앙으로 스프링 리턴. J는 긴 핸들(ZB5AJ3), G는 키 스위치입니다.
  • 접점이 있는 본체: ZB5AZ101(1 NO), ZB5AZ102(1 NC), ZB5AZ103(2 NO), ZB5AZ104(2 NC), ZB5AZ105(1 NO + 1 NC), ZB5AZ141(1 NO + 2 NC).

Harmony XB4와 공유되는 부품

접점 블록(ZBE101 NO, ZBE102 NC, ZBE203/204/205 더블, 저전력 ZBE1016) 및 유니버설 LED 라이트 블록(ZBVB1, ZBVG1, ZBVM1)은 두 제품군에서 동일한 참조 번호를 사용합니다. 레전드 홀더(ZBZ32), 인쇄된 레전드(예: ZBY2385 "AUTO-O-HAND"), 셀렉터 가드 ZBZ2102 및 비상 정지 가드 ZBZ1605도 마찬가지입니다. XB5 전용 부품으로는 고정 칼라 ZB5AZ009, 블랭킹 플러그 ZB5SZ3, 30mm 플러시 키트 ZB5AZ021 / ZB5AZ022, 예비 고정 너트 ZB5AZ901 및 너트 도구 ZB5AZ905이 있습니다.

제품군 사양(Schneider 카탈로그, 2026년 1월)

  • IP66, IP67, IP69, IP69K 및 UL Type 4X; −40 ~ +70 °C; 이중 절연
  • IEC, UL, CSA, CCC, EAC, JIS; 해양 인증
  • 충격: 카탈로그 한 페이지에는 "최대 IK06", 다른 페이지에는 "최대 IK03"로 표기되어 있으며, 확인한 데이터시트(XB5AD33, XB5AD33N)에는 IK04로 표기됨
  • 화학적 저항성은 금속 XB4 대비 이 제품군의 강점이며, 충격, 진동 및 열에 대해서는 Schneider는 XB4(IK06)를 권장합니다.

설치 방법

XB4와 달리, 헤드는 전면의 플라스틱 너트로 고정되며, Schneider의 도구 ZB5AZ905를 사용하여 2.2 N·m로 조입니다. 본체는 후면에서 클립으로 고정됩니다. 단자는 0.34–1.5 mm²(AWG 22–16)를 수용하며, 단자당 두 개의 와이어를 0.8–1.2 N·m로 조일 수 있습니다.

주의 사항: XB5…N은 다른 지역별 제품군입니다

N으로 끝나는 코드(XB5AD33N, "Harmony XB5N / XB7N")는 Schneider의 인도 지역용 제품군으로, 글로벌 XB5 부품이 아닙니다:

XB5AD33(글로벌 XB5)XB5AD33N(지역 XB5N)
보호 등급IP67, IP69, IP69KIP65(제품 웹 페이지에는 IP54로 표기)
작동 온도−40 ~ +70 °C−25 ~ +70 °C
인증UL, CSA, BVCE
접점, 사양, 100만 사이클, Class II동일동일

둘 다 정품 Schneider 부품입니다. 워시다운, 실외 또는 북미(UL)용으로 사용할 경우 N이 없는 코드를 주문하십시오. Schneider 중국도 동일한 분할을 언급합니다: XB5는 수입 및 현지 생산 모델로 존재하며, XB4는 수입 전용입니다.

구매 시 참고 사항

  • 유사 제품: XB5는 일반적인 유형 이름으로도 사용됩니다. Amazon은 Schneider 제품이 아닌 무브랜드 "XB5" 푸시버튼 및 셀렉터를 판매합니다.
  • 리뷰: 일부 인도 쇼핑 페이지에는 동일한 다섯 명의 리뷰어 이름과 날짜가 다른 제품에 표시되는 템플릿 리뷰가 있습니다. 이러한 리뷰는 무시했습니다.
  • 사용 중 문제점: XB5에 대한 반복적인 고장 패턴은 발견되지 않았습니다(다섯 가지 언어로 크랙 또는 느슨한 너트 및 파손된 셀렉터를 검색했습니다).
출처
  1. Harmony XB5 plastic Control and signaling units catalog (DIA5ED2121213EN, January 2026) — Schneider Electric
  2. XB5AD33 product page and datasheet — Schneider Electric India
  3. XB5AD33N (Harmony XB5N/XB7N, local range) product page and datasheet — Schneider Electric India
  4. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  5. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  6. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  7. Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts — Schneider Electric, YouTube

사양 목록

Bezel material
plastic
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZB5
Panel cutout
22mm
Pn status
decoded
Product type
Light Block with Body Fixing Collar
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony ZB5 22mm PLASTIC-bezel modular component (operator head OR contact block, for user assembly into an XB5 device)
Shopify id
8346403963193
Vendor
Schneider Electric

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

구매처

가격 범위

$17.93 — $17.93

from 1 seller in US dollars

주요 사양

Bezel material
plastic
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZB5
Panel cutout
22mm