EVQ-P2V02M

현행 제품

Panasonic EVQ-P2V02M

Panasonic EVQ-P2V02M — Panasonic EVQ-P2V02M

시리즈 사진: 판매자가 이를 5개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches FLAT ACT 3.5NF 4.7x3.5mm

연구 노트

1. What this is

EVQ-P2V02M is a Panasonic EVQ tactile switch.

2. Part-number decode

  • Series: Panasonic EVQ
  • Type: tactile switch

3. Compatibility & ordering

Panasonic makes compact light-touch tactile and detector switches for PCB use. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Panasonic series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Panasonic product catalog (industrial.panasonic.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. Panasonic — EVQ-P2V02M — industrial.panasonic.com

사양 목록

Device class
tactile switch
Enriched by
panasonic-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
EVQ
Mouser part number
667-EVQ-P2V02M
Pn status
decoded
Rohs status
RoHS Compliant
Series description
Panasonic EVQ-series light-touch tactile switch (compact PCB tact switch; SMD/through-hole, various forces/heights)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
tactile switch
Enriched by
panasonic-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
EVQ
Mouser part number
667-EVQ-P2V02M