P8-546511A

현행 제품

OTTO P8-546511A

OTTO P8-546511A — OTTO P8-546511A

시리즈 사진: 판매자가 이를 13개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Pushbutton Switches Solder/ Black Momtry 10A SPST-DB, SPDT-D

연구 노트

1. What this is

P8-546511A is an OTTO P8-series compact sealed momentary pushbutton — shortened back-panel depth with the same features as the regular P1/P3.

2. Part-number decode

  • Series: OTTO P8
  • Action: Momentary
  • Configuration code: the digits after the dash (e.g. the 546511A group) encode the exact actuator, contact arrangement, termination, and cap/color per OTTO's datasheet — not derivable from the part number alone

3. Compatibility & ordering

OTTO switches are rugged, sealed electromechanical pushbuttons for commercial, military, and aerospace use. Match by series (size/style — P1 full-size, P3 regular, P8 compact, P9 dome, P7 subminiature, P5 alternate-action), action (momentary vs latching), and illumination, then use OTTO's datasheet to confirm the exact contact/terminal/cap configuration encoded in the numeric part of the code.

4. Data-quality note

The OTTO series and action type are decoded from the part number (grounded in OTTO's product bulletins and distributor listings). The exact electrical configuration in the numeric code — contact arrangement (NO/NC), terminal type, and cap/color — is OTTO-catalog-specific and is not asserted here; confirm it against OTTO's datasheet or 'build-a-part' for a precise order. Flagged decoded-partial rather than guessed.

5. Sources

  • OTTO Controls product bulletin for the P8 series (otto-controls.com)
  • Distributor listing (Mouser / Peerless Electronics) — search the exact part number

출처
  1. OTTO Controls — P8-546511A — otto-controls.com

사양 목록

Action
Momentary
Config code
OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
Device class
sealed pushbutton
Enriched by
otto-decoder-2026-08-12
Lead time
42 Days
Manufacturer series
P8
Mouser part number
999-P8-546511A
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
OTTO P8-series compact sealed momentary pushbutton — shortened back-panel depth with the same features as the regular P1/P3

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Action
Momentary
Config code
OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
Device class
sealed pushbutton
Enriched by
otto-decoder-2026-08-12
Lead time
42 Days