B3J-2000

현행 제품

Omron Electronics B3J-2000

Omron Electronics B3J-2000 — Omron Electronics B3J-2000

시리즈 사진: 판매자가 이를 13개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches Light Gray Hinge 1 LED Red

연구 노트

1. What this is

B3J-2000 is an Omron B3 tactile switch.

2. Part-number decode

  • Series: Omron B3
  • Type: tactile switch

3. Compatibility & ordering

Omron makes industrial command switches (A22 22mm, A16 16mm — unitized, contact in the model code), illuminated pushbuttons/pilot lights (A3, M2), and a widely-used B3 PCB tactile-switch family. Match by size, function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement, then use the Omron datasheet to confirm the exact colour and voltage encoded in the part number.

4. Data-quality note

The Omron series and switch type are decoded from the part number (grounded in the omron.com catalog and DigiKey listings; A22 corroborated by curated-loop work). Omron 22/16mm command switches are unitized — the contact arrangement is part of the model code — but the exact colour and voltage suffix should be confirmed against the Omron datasheet for a precise order (not guessed here).

5. Sources

  • Omron product catalog (omron.com / components.omron.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. Omron — B3J-2000 — omron.com

사양 목록

Device class
tactile switch
Enriched by
omron-decoder-2026-08-12
Lead time
180 Days
Manufacturer series
B3
Mouser part number
653-B3J-2000
Pn status
decoded
Rohs status
RoHS Compliant
Series description
Omron B3-series tactile switch (B3F through-hole, B3W/B3S SMD, B3J, B3AL illuminated — a very widely used PCB tact-switch family)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
tactile switch
Enriched by
omron-decoder-2026-08-12
Lead time
180 Days
Manufacturer series
B3
Mouser part number
653-B3J-2000