5136

현행 제품

Keystone Electronics 5136

Keystone Electronics 5136 — Keystone Electronics 5136

시리즈 사진: 판매자가 이를 21개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches MINI FOUR LEG KEYPAD DOME SWITCH .022" H

연구 노트

1. What this is

5136 ("Keystone Electronics 5136") is catalogued as a push-button / switch device from Keystone Electronics.

2. What we know

  • Manufacturer: Keystone Electronics
  • Category: push-button / switch device
  • Part number / name: 5136 — Keystone Electronics 5136
  • Keystone Electronics — electronic hardware (battery holders, terminals, standoffs, test points)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Keystone Electronics catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Keystone Electronics product catalog — search "5136" / "Keystone Electronics 5136"

출처
  1. Keystone Electronics 5136 — distributor/catalog

사양 목록

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser part number
534-5136
Pn status
needs-verification
Rohs status
RoHS Compliant

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser part number
534-5136
Pn status
needs-verification