시리즈 사진: 판매자가 이를 23개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.
Switch Fixings TYPE B BTN EXTD BLACK UP
연구 노트
1. What this is
E30KB105 is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).
2. Part-number decode
- Series: E30
- Panel cutout: 30.5mm
- Type: operator/collar/block
- Construction: modular (operator, contact block(s), and mounting are separate parts)
3. Compatibility & ordering
Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.
4. Data-quality note
The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).
5. Sources
- Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
- Distributor listing (Newark / Mouser) — search the exact part number
출처
- Eaton — E30KB105 — eaton.com
사양 목록
|
Component type
|
operator/collar/block
|
|
Enriched by
|
eaton-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
E30
|
|
Modular
|
true
|
|
Mouser part number
|
504-E30KB105
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded
|
|
Rohs status
|
|
|
Series description
|
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
주요 사양
- Component type
- operator/collar/block
- Enriched by
- eaton-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- E30
- Modular
- true