PV8F2U0SS-305

현행 제품

E-Switch PV8F2U0SS-305

E-Switch PV8F2U0SS-305 — E-Switch PV8F2U0SS-305

시리즈 사진: 판매자가 이를 14개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Pushbutton Switches Anti-vandal,SS,Illum Sealed IP65, Wht, 4P

연구 노트

1. What this is

PV8F2U0SS-305 is an E-Switch PV-series anti-vandal pushbutton.

2. Part-number decode

  • Series: E-Switch PV
  • Type: pushbutton

3. Compatibility & ordering

E-Switch makes tactile, pushbutton (incl. anti-vandal/illuminated), toggle, slide, and appliance switches for electronics and industrial controls. Match by type, actuation (momentary/maintained), illumination, sealing, and mounting, then use the E-Switch datasheet to confirm the exact contact form and termination encoded in the part number.

4. Data-quality note

The E-Switch series and switch type are decoded from the part number (grounded in the e-switch.com catalog and DigiKey listings). The exact contact form, termination, actuation force, and illumination colour are encoded in the full order code — confirm against the E-Switch datasheet for a precise order (not guessed here).

5. Sources

  • E-Switch product catalog (e-switch.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. E-Switch — PV8F2U0SS-305 — e-switch.com

사양 목록

Device class
pushbutton
Enriched by
eswitch-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
PV
Mouser part number
612-PV8F2U0SS-305
Pn status
decoded
Rohs status
RoHS Compliant
Series description
E-Switch PV-series pushbutton switch — metal, sealed process / anti-vandal pushbutton (panel-mount, momentary or maintained; illuminated variants available)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
pushbutton
Enriched by
eswitch-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
PV
Mouser part number
612-PV8F2U0SS-305