KXT 321 LHS

현행 제품

C&K KXT 321 LHS

C&K KXT 321 LHS — C&K KXT 321 LHS

시리즈 사진: 판매자가 이를 2개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches Ultra Low Profile Top Actuated Tactile

연구 노트

1. What this is

KXT 321 LHS is a C&K tactile switch (K-series: KSC/KSA/KSR/KSL/KST/KSI/KMR/KMT/KXT etc., plus ITS/SSF — high-reliability PCB tact switch, many with sealed IP-rated and low-profile options).

2. Part-number decode

  • Product line: C&K K-series tactile
  • Type: tactile switch

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are decoded from the part number (grounded in C&K's series datasheets and DigiKey/Mouser listings). The exact actuator height, actuation force, contact rating, and termination are encoded in the full order code and depend on the specific line — confirm against the C&K datasheet for a precise order.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. C&K Switches — KXT 321 LHS — ckswitches.com

사양 목록

Device class
tactile switch
Enriched by
ck-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
K-series tactile
Mouser part number
611-KXT321LHS
Pn status
decoded
Rohs status
RoHS Compliant
Series description
C&K tactile switch (K-series: KSC/KSA/KSR/KSL/KST/KSI/KMR/KMT/KXT etc., plus ITS/SSF — high-reliability PCB tact switch, many with sealed IP-rated and low-profile options)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
tactile switch
Enriched by
ck-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
K-series tactile
Mouser part number
611-KXT321LHS