E221SD1CGE

현행 제품

C&K E221SD1CGE

C&K E221SD1CGE — C&K E221SD1CGE

시리즈 사진: 판매자가 이를 10개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Pushbutton Switches ON-(ON) DPDT PCB

연구 노트

1. What this is

E221SD1CGE is a C&K E-series sealed subminiature pushbutton switch (PCB/panel, momentary or maintained).

2. Part-number decode

  • Product line: C&K E-series
  • Type: pushbutton

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are identified; the detailed configuration (actuator, force, termination, contact form) is line-specific and left to the C&K datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. C&K Switches — E221SD1CGE — ckswitches.com

사양 목록

Device class
pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
91 Days
Manufacturer series
E-series
Mouser part number
611-E221-001
Pn status
decoded-partial
Rohs status
Series description
C&K E-series sealed subminiature pushbutton switch (PCB/panel, momentary or maintained)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
pushbutton
Enriched by
ck-decoder-2026-08-12
Lead time
91 Days
Manufacturer series
E-series
Mouser part number
611-E221-001