PBB-11817-2

현행 제품

Bud Industries PBB-11817-2

Bud Industries PBB-11817-2 — Bud Industries PBB-11817-2

Push-button Enclosures Polycarbonate Two Push Button Box (5.1 X 3.2 X 3.4 In)

연구 노트

1. What this is

PBB-11817-2 ("Bud Industries PBB-11817-2") is catalogued as a push-button / switch device from Bud Industries.

2. What we know

  • Manufacturer: Bud Industries
  • Category: push-button / switch device
  • Part number / name: PBB-11817-2 — Bud Industries PBB-11817-2
  • Bud Industries — electronics enclosures and racks

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Bud Industries catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Bud Industries product catalog — search "PBB-11817-2" / "Bud Industries PBB-11817-2"

Verified distributor data (Mouser)

This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.


출처
  1. Bud Industries PBB-11817-2 — distributor/catalog

사양 목록

Datasheet url
https://www.mouser.com/datasheet/3/258/1/hbpbb118172.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
28 Days
Mouser checked
2026-09-28
Mouser description
Push-button Enclosures Polycarbonate Two Push Button Box (5.1 X 3.2 X 3.4 In)
Mouser matched
true
Mouser part number
563-PBB-11817-2
Pn status
verified
Rohs status
RoHS Compliant

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Datasheet url
https://www.mouser.com/datasheet/3/258/1/hbpbb118172.pdf
Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
28 Days
Mouser checked
2026-09-28