MFKZQ01LM
현행 제품Aqara Cube T1 Pro (6-Axis Motion Controller)
Aqara Cube T1 Pro — motion-sensing smart controller.
일반적인 용도
Not a traditional button — a cube you flip, rotate, shake, and tap to trigger actions. 6-axis gyroscope detects which face is up, rotation angle, tap, shake, and throw events. Each face can control a different room or device. The most creative smart home controller available. Zigbee 3.0 with full Z2M support. Kids love it.
개방성 및 커스터마이징
Full Zigbee2MQTT support. All 6 faces + rotation + shake events exposed in Home Assistant. No hub required with generic coordinator.
사양 목록
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2450
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Aqara Home, HomeKit (via Hub), Home Assistant, Zigbee2MQTT
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
설치 빠른 참조
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2450 battery. Expected life: 2 years. Low battery notification via the app.
외형 치수
문제 해결
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
주요 사양
- Battery Life
- 2 years
- Battery Type
- CR2450
- Smart Home Integrations
- Aqara Home, HomeKit (via Hub), Home Assistant, Zigbee2MQTT
- Protocol
- Zigbee 3.0
사용자 후기
“Full Zigbee2MQTT support. All 6 faces + rotation + shake events exposed in Home Assistant. No hub required with generic coordinator.”
