PHAP3372ER

현행 제품

Apem PHAP3372ER

APEM PHAP3372ER — Apem PHAP3372ER

시리즈 사진: 판매자가 이를 5개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Tactile Switches TACT SWITCH PCB MOUNT

연구 노트

1. What this is

PHAP3372ER is an APEM PHAP pushbutton.

2. Part-number decode

  • Series: APEM PHAP
  • Type: pushbutton

3. Compatibility & ordering

APEM makes pushbuttons (incl. anti-vandal and illuminated), tactile switches, toggle switches, joysticks, and indicators for industrial and electronic equipment. Match by type, actuation, illumination, sealing (IP rating), and mounting, then use the APEM datasheet to confirm the exact contact and actuator configuration encoded in the part number.

4. Data-quality note

The APEM product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • APEM product catalog (apem.com)
  • Distributor listing (RS / Mouser / DigiKey) — search the exact part number

출처
  1. APEM — PHAP3372ER — apem.com

사양 목록

Device class
pushbutton
Enriched by
apem-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
PHAP
Mouser part number
642-PHAP3372ER
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
APEM PHAP-series sealed pushbutton switch (compact panel pushbutton)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
pushbutton
Enriched by
apem-decoder-2026-08-12
Lead time
84 Days
Manufacturer series
PHAP
Mouser part number
642-PHAP3372ER