2AF3-NB

현행 제품

Altech 2AF3-NB

Pushbutton Switches Push Button Oper.,22mm,Non Ill

연구 노트

1. What this is

2AF3-NB is an Altech 2AF-series 22mm non-illuminated metal-operator flush pushbutton (metal bezel, momentary or maintained per config).

2. Part-number decode

  • Series: Altech 2AF
  • Panel cutout: 22mm
  • Operator material: Metal

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Altech series is decoded from the part number (grounded in Altech's 22mm pushbutton tech-spec sheet and distributor listings). Exact contact arrangement and cap/color depend on the full config code — confirm against the Altech datasheet for a precise order.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

출처
  1. Altech Corp — 2AF3-NB — altechcorp.com

사양 목록

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
2AF
Mouser part number
845-2AF3NB
Operator material
metal
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
Altech 2AF-series 22mm non-illuminated metal-operator flush pushbutton (metal bezel, momentary or maintained per config)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

주요 사양

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
2AF
Mouser part number
845-2AF3NB