Allen-Bradley · 800F 시리즈

800F-FP5

현행 제품
UL CSA CE

800F 40mm Yellow Mushroom Palm Button

Allen-Bradley 800F 시리즈 Introduced circa 2005

Allen-Bradley 800F 40mm yellow mushroom button — palm operated.

일반적인 용도

Yellow mushroom (palm) button for two-hand control applications. Both hands must press simultaneously to activate the machine — prevents reaching into the danger zone. Used on power presses, shears, and stamping equipment per OSHA 29 CFR 1910.217.

사양 목록

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Yellow
Cutout Diameter
22mm
IP Rating
IP66

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

구매처

가격 범위

$0.72 — $8.22

2개 대리점

주요 사양

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Yellow
Cutout Diameter
22mm

사용자 후기

+

“Yellow mushroom (palm) button for two-hand control applications. Both hands must press simultaneously to activate the machine — prevents reaching into the danger zone. Used on power presses, shears, a”

Reddit r/PLC 33 추천 스레드 보기 →