CREAMY CYAN 50G CLICKY PCB MOUNT SWITCHES 45 PACK

Name: Akko CREAMY CYAN 50G CLICKY PCB MOUNT SWITCHES 45 PACK
Brand: Akko
SKU: CREAMY CYAN 50G CLICKY PCB MOUNT SWITCHES 45 PACK
Price: 11.0 USD
Availability: InStock

현행 제품

Akko Creamy Cyan 50g Clicky PCB Mount Switches 45 Pack

50g actuation force 2.0mm pretravel 4.0mm total travel POM stem Polycarbonate top and bottom housing Factory lubed LED light condenser for increased RGB brightness

연구 노트

1. What this is

Akko Creamy Cyan 50g Clicky PCB Mount Switches 45 Pack is a mechanical keyboard switch from Akko. It is clicky, 50g, 5-pin (PCB mount).

2. Spec decode (from product name)

Switch type: clicky
Actuation force: 50g
Mount: 5-pin (PCB mount)

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type, force, and/or mount are decoded from the product name (the standard way keyboard switches are specified). Confirm exact spring curve, travel, and housing/stem material against the manufacturer's spec if precision matters. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Akko product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

출처

Akko Akko Creamy Cyan 50g Clicky PCB Mount Switches 45 Pack — keyboard-switch spec

사양 목록

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	50g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Mount	5-pin (PCB mount)
Pn status	decoded
Product type	Keyboard Switches
Series description	Akko mechanical keyboard switch (clicky)
Shopify id	9773749633324
Switch type	clicky
Vendor	Akko

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.