Adafruit Accessories Large Arcade LED Red Button
사양 목록
|
Lead time
|
5 Days
|
|
Mouser part number
|
485-1190
|
|
Rohs status
|
RoHS Compliant
|
설치 빠른 참조
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
외형 치수
문제 해결
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
주요 사양
- Lead time
- 5 Days
- Mouser part number
- 485-1190
- Rohs status
- RoHS Compliant
