MPET4-20R-01

현행 제품

ABB MPET4-20R-01

부품 번호: MP
ABB MPET4-20R-01 — ABB MPET4-20R-01

시리즈 사진: 판매자가 이를 2개의 다른 부품에도 사용하므로 정확히 이 버전을 보여주지 않을 수 있습니다.

Emergency Stop Switches / E-Stop Switches ESTOP 40MM MUSH TWIST RELEASE RED 1NC

연구 노트

1. What this is

MPET4-20R-01 is a ABB MP/CP 22mm command switch.

2. Part-number decode

  • Series: ABB Modular MP/CP
  • Type: command switch
  • Panel cutout: 22mm

3. Compatibility & ordering

ABB makes Modular (MP metal / CP plastic) 22mm command switches, CE compact switches, KP mushroom operators, and Jokab (2TLA) safety products. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The ABB series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • ABB product catalog (abb.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

출처
  1. ABB — MPET4-20R-01 — abb.com

사양 목록

Device class
command switch
Enriched by
abb-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Modular MP/CP
Mouser part number
894-MPET4-20R-01
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
ABB Modular MP (metal) / CP (plastic) 22mm command switch — MP heads have contact SEPARATE; CP1 unitized (curated-loop rule)

설치 빠른 참조

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

외형 치수

문제 해결

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

사진 및 도면

이미지: mouser.com

주요 사양

Device class
command switch
Enriched by
abb-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Modular MP/CP
Mouser part number
894-MPET4-20R-01