Square D 9001BOC368 Push Button Control Station The Square D 9001BOC368 is a push button control station with a current rating of 5 Amps and a voltage rating of 600VAC. It has a screw clamp terminal connection.
研究ノート
1. What this is
9001BOC368 is a Square D 9001 command device.
2. Part-number decode
- Series: Square D 9001
- Type: command switch
- Panel cutout: 30.5mm
3. Compatibility & ordering
Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Square D product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Square D product catalog (se.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
出典
- Square D — 9001BOC368 — se.com
仕様一覧
|
Device class
|
command switch
|
|
Enriched by
|
squared-decoder-2026-08-12
|
|
Manufacturer series
|
9001
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Push Button Control Station
|
|
Series description
|
Square D Class 9001 30mm command device / accessory
|
|
Shopify id
|
8345411486009
|
|
Vendor
|
Square D
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Device class
- command switch
- Enriched by
- squared-decoder-2026-08-12
- Manufacturer series
- 9001
- Panel cutout
- 30.5mm
- Pn status
- decoded-partial