PS-14-DN-C
現行品PS-14-DN 30mm Snap-in Clear Button
Seimitsu PS-14-DN clear 30mm snap-in for LED builds.
主な用途
Seimitsus LED-compatible button. Clear shell with 85g actuation (heavier than Sanwa). For players who want LED lighting with the firmer Seimitsu feel. Snap-in mounting.
仕様一覧
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
85g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Clear (LED compatible)
|
|
Diameter
|
30mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Seimitsu built-in
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm
|
取付クイックリファレンス
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
外形寸法
トラブルシューティング
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
主要仕様
- Actuation Force
- 85g
- Color
- Clear (LED compatible)
- Diameter
- 30mm
- Microswitch Type
- Seimitsu built-in
- Mounting Type
- Snap-in
ユーザーの声
“Seimitsus LED-compatible button. Clear shell with 85g actuation (heavier than Sanwa). For players who want LED lighting with the firmer Seimitsu feel. Snap-in mounting.”
