9001SKR5RH13
現行品Schneider Electric 9001SKR5RH13 Push Button
Schneider Electric 9001SKR5RH13 Push Button The Schneider Electric 9001SKR5RH13 is a push button with a current rating of 10 Amps and a voltage rating of 600VAC. It has a panel mounting type and features with a momentary action. The 9001SKR5RH13 has a spring return actuator type.
研究ノート
1. What this is
9001SKR5RH13 is a Schneider Electric Harmony Class 9001SK 30mm heavy-duty command device — complete operator with black bezel (US-style 30.5mm).
2. Part-number decode
- Series: Square D 9001SK
- Panel cutout: 30.5mm
- Bezel material: Metal
- Type: complete unit
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
出典
- Schneider Electric — 9001SKR5RH13 — se.com
仕様一覧
|
Bezel material
|
metal
|
|
Component type
|
complete unit
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Manufacturer series
|
Square D 9001SK
|
|
Panel cutout
|
30.5mm
|
|
Pn status
|
decoded
|
|
Product type
|
Push Button
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Series description
|
Square D Harmony Class 9001SK 30mm heavy-duty command device — complete operator with black bezel (US-style 30.5mm)
|
|
Shopify id
|
8346682884409
|
|
Vendor
|
Schneider Electric
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Bezel material
- metal
- Component type
- complete unit
- Enriched by
- schneider-decoder-2026-08-12
- Manufacturer series
- Square D 9001SK
- Panel cutout
- 30.5mm
