LP9-41111K22

現行品

OTTO LP9-41111K22

OTTO LP9-41111K22 — OTTO LP9-41111K22

シリーズ画像: 販売者は165個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Pushbutton Switches Raised Thrd Sldr 12V White LED Black

研究ノート

1. What this is

LP9-41111K22 is an OTTO LP9-series illuminated dome-style sealed pushbutton (lighted, P9 dome family).

2. Part-number decode

  • Series: OTTO LP9
  • Action: Momentary
  • Illuminated: yes (lighted pushbutton)
  • Configuration code: the digits after the dash (e.g. the 41111K22 group) encode the exact actuator, contact arrangement, termination, and cap/color per OTTO's datasheet — not derivable from the part number alone

3. Compatibility & ordering

OTTO switches are rugged, sealed electromechanical pushbuttons for commercial, military, and aerospace use. Match by series (size/style — P1 full-size, P3 regular, P8 compact, P9 dome, P7 subminiature, P5 alternate-action), action (momentary vs latching), and illumination, then use OTTO's datasheet to confirm the exact contact/terminal/cap configuration encoded in the numeric part of the code.

4. Data-quality note

The OTTO series and action type are decoded from the part number (grounded in OTTO's product bulletins and distributor listings). The exact electrical configuration in the numeric code — contact arrangement (NO/NC), terminal type, and cap/color — is OTTO-catalog-specific and is not asserted here; confirm it against OTTO's datasheet or 'build-a-part' for a precise order. Flagged decoded-partial rather than guessed.

5. Sources

  • OTTO Controls product bulletin for the LP9 series (otto-controls.com)
  • Distributor listing (Mouser / Peerless Electronics) — search the exact part number

出典
  1. OTTO Controls — LP9-41111K22 — otto-controls.com

仕様一覧

Action
Momentary
Config code
OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
Device class
sealed pushbutton
Enriched by
otto-decoder-2026-08-12
Illuminated
true
Lead time
42 Days
Manufacturer series
LP9
Mouser part number
999-LP9-41111K22
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
OTTO LP9-series illuminated dome-style sealed pushbutton (lighted, P9 dome family)

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Action
Momentary
Config code
OTTO configuration code — exact actuator/contact/terminal/cap per OTTO datasheet (not decodable from PN alone)
Device class
sealed pushbutton
Enriched by
otto-decoder-2026-08-12
Illuminated
true