SB4011NCMG

現行品

NKK Switches SB4011NCMG

NKK Switches SB4011NCMG — NKK Switches SB4011NCMG

シリーズ画像: 販売者は37個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Pushbutton Switches MINIATURE PUSHBUTTON PANEL MOUNT

研究ノート

1. What this is

SB4011NCMG is an NKK S-series toggle switch (incl. dual-seal waterproof toggles).

2. Part-number decode

  • Product line: NKK S-series toggle
  • Type: toggle switch

3. Compatibility & ordering

NKK Switches makes high-quality toggle, rocker, pushbutton, tactile, and programmable SmartSwitch products for panel and PCB mounting. Match by type (toggle/rocker/pushbutton/programmable), actuation (momentary vs alternate), illumination, mounting, and the electrical rating, then use the NKK datasheet to confirm the exact contact form and termination encoded in the part number.

4. Data-quality note

The NKK switch type is identified; the detailed configuration (contact form, termination, cap/colour) is line-specific and left to the NKK datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • NKK Switches product catalog (nkkswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

出典
  1. NKK Switches — SB4011NCMG — nkkswitches.com

仕様一覧

Device class
toggle switch
Enriched by
nkk-decoder-2026-08-12
Lead time
154 Days
Manufacturer series
S-series toggle
Mouser part number
633-SB4011NCMG
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
NKK S-series toggle switch (incl. dual-seal waterproof toggles)

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Device class
toggle switch
Enriched by
nkk-decoder-2026-08-12
Lead time
154 Days
Manufacturer series
S-series toggle
Mouser part number
633-SB4011NCMG