632-S
現行品Clipper 632-S Single Pedal Foot Switch
Heavy-duty single-pedal momentary foot switch with cast iron housing and SPDT contacts rated 20A/250VAC. Ergonomic shape with non-skid base plate and corrosion-resistant finish.
主な用途
Mount to floor or equipment base using two provided holes. Connect via included 8 ft cord with 3-prong plug. SPDT contacts allow wiring as normally-open or normally-closed. Momentary action — circuit changes state only while pedal is depressed. Standard on machine tools, drill presses, and spot welders.
仕様一覧
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Single Pedal
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
The electrical switching arrangement.
|
SPDT
|
|
Current rating
|
20A at 125/250 VAC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Cast Iron
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
5,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Floor mount
|
|
Max Voltage
|
250V AC
|
取付クイックリファレンス
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
外形寸法
配線図
トラブルシューティング
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
主要仕様
- Actuator Type
- Single Pedal
- Certifications
- UL, CSA, CE
- Contact Configuration
- SPDT
- Current rating
- 20A at 125/250 VAC
- Material
- Cast Iron
ユーザーの声
“Solid Linemaster product, widely available and well-documented.”