5174TR

現行品

Keystone Electronics 5174TR

Keystone Electronics 5174TR — Keystone Electronics 5174TR

シリーズ画像: 販売者は21個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Tactile Switches MAXI 4 LEG KEYPAD DOME SWITCH .030" H

研究ノート

1. What this is

5174TR ("Keystone Electronics 5174TR") is catalogued as a push-button / switch device from Keystone Electronics.

2. What we know

  • Manufacturer: Keystone Electronics
  • Category: push-button / switch device
  • Part number / name: 5174TR — Keystone Electronics 5174TR
  • Keystone Electronics — electronic hardware (battery holders, terminals, standoffs, test points)

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Keystone Electronics catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Keystone Electronics product catalog — search "5174TR" / "Keystone Electronics 5174TR"

出典
  1. Keystone Electronics 5174TR — distributor/catalog

仕様一覧

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser part number
534-5174TR
Pn status
needs-verification
Rohs status
RoHS Compliant

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
0 Days
Mouser part number
534-5174TR
Pn status
needs-verification