CPG1511-BROWN
現行品Kailh Choc V1 Brown Tactile Low-Profile
Kailh Choc V1 low-profile tactile switch.
主な用途
Low-profile tactile — the Brown equivalent for slim keyboards. Tactile bump in a 3mm total travel package. Used in Nuphy Air75, Keychron K3, and custom low-profile builds. Not MX-compatible — requires Choc keycaps.
仕様一覧
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Brown stem
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
50,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Choc low-profile PCB mount
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
1.5mm actuation, 3mm total
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Actuation Force
- 50g
- Color
- Brown stem
- Mechanical Life
- 50,000,000 cycles
- Mounting Type
- Choc low-profile PCB mount
- Travel Distance
- 1.5mm actuation, 3mm total
ユーザーの声
“Low-profile tactile — the Brown equivalent for slim keyboards. Tactile bump in a 3mm total travel package. Used in Nuphy Air75, Keychron K3, and custom low-profile builds. Not MX-compatible — requires”
