TLSA040JLFS

現行品

C&K TLSA040JLFS

C&K TLSA040JLFS — C&K TLSA040JLFS

シリーズ画像: 販売者は2個の他の部品にも使用しているため、この正確なバージョンが表示されない場合があります。

Tactile Switches SWITCH TLSA040JLFS

研究ノート

1. What this is

TLSA040JLFS is a C&K toggle switch (7000-series / T-series — miniature or standard toggle, many poles/throws and terminations).

2. Part-number decode

  • Product line: C&K 7000/T-series
  • Type: toggle switch

3. Compatibility & ordering

C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.

4. Data-quality note

The C&K product line and switch type are identified; the detailed configuration (actuator, force, termination, contact form) is line-specific and left to the C&K datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • C&K Switches series datasheet (ckswitches.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

出典
  1. C&K Switches — TLSA040JLFS — ckswitches.com

仕様一覧

Device class
toggle switch
Enriched by
ck-decoder-2026-08-12
Lead time
91 Days
Manufacturer series
7000/T-series
Mouser part number
611-TLSA040JLFS
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
C&K toggle switch (7000-series / T-series — miniature or standard toggle, many poles/throws and terminations)

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Device class
toggle switch
Enriched by
ck-decoder-2026-08-12
Lead time
91 Days
Manufacturer series
7000/T-series
Mouser part number
611-TLSA040JLFS