Tactile Switches Lighted SMT Tact Switch with Rugged LED Mounting Process
Research Notes
1. What this is
K8WH41G LFS is a C&K switch — line not recognized.
2. Part-number decode
- Product line: C&K C&K (line not recognized)
- Type: switch
3. Compatibility & ordering
C&K makes high-reliability electronic switches for PCB and panel mounting. Match by type (tactile / pushbutton / toggle / rotary), actuation (momentary vs latching), mounting (SMT / thru-hole / panel), and the electrical rating, then use the C&K datasheet to confirm the exact actuator height, force, and termination encoded in the part number.
4. Data-quality note
The exact C&K product line/configuration could not be confidently decoded from this part number (it may be a partial/free-text code fragment). Kept and documented; flagged needs-verification rather than guessed.
5. Sources
- C&K Switches series datasheet (ckswitches.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- C&K Switches — K8WH41G LFS — ckswitches.com
仕様一覧
|
Enriched by
|
ck-decoder-2026-08-12
|
|
Lead time
|
91 Days
|
|
Manufacturer series
|
C&K (line not recognized)
|
|
Mouser part number
|
611-K8WH41G
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
C&K electronic component switch — exact product line/config could not be decoded from this part number; kept and flagged for verification rather than guessed
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
主要仕様
- Enriched by
- ck-decoder-2026-08-12
- Lead time
- 91 Days
- Manufacturer series
- C&K (line not recognized)
- Mouser part number
- 611-K8WH41G
- Pn status
- needs-verification
