Blue Sea Systems · Contura III シリーズ

8292

現行品
UL ABYC E-11 CE

Contura III Rocker Switch SPDT Marine

Blue Sea Systems Contura III シリーズ Introduced circa 2000

Blue Sea Contura III SPDT rocker switch.

主な用途

SPDT version of the Contura for momentary-on/off applications. Anchor windlass up, bilge pump override, deck wash. Same sealed neoprene boot as Contura II. Drop-in compatible with all Contura panel cutouts.

仕様一覧

Actuator Function
Maintained
Certifications
UL, ABYC E-11, CE
Color
Black
Contact Configuration
SPDT ON-OFF
IP Rating
IP66

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

配線図

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

主要仕様

Actuator Function
Maintained
Certifications
UL, ABYC E-11, CE
Color
Black
Contact Configuration
SPDT ON-OFF
IP Rating
IP66

ユーザーの声

+

“SPDT version of the Contura for momentary-on/off applications. Anchor windlass up, bilge pump override, deck wash. Same sealed neoprene boot as Contura II. Drop-in compatible with all Contura panel cu”

Reddit r/boating 23 高評価 スレッドを見る →